8-Panel Solar Installation in Bexhill-On-Sea
8 panels · 3.8 kWp · 5.0 kWh battery
About this installation
We completed an 8-panel solar and battery installation for a homeowner in Bexhill-On-Sea in July 2026. This system uses Jinko Solar JKM470N-60HL4 panels, an Anker SOLIX X1-H6K-S inverter, and an Anker SOLIX X1-B5-H battery with a 5 kWh capacity. The total system size is 3.76 kWp.
The system typically generates 4,018 kWh of electricity annually. That is around 183% of the home's annual electricity use. Annual savings for the homeowner are estimated at £773.
Generation and consumption figures are design-stage estimates: the system’s modelled annual output compared with this household’s annual electricity use at the time of the quote. They are an annual energy comparison, not the share of the home’s demand met directly, and not measured results.
Installer’s notes
What the customer asked for, why the system was designed this way, and what the job involved.
8 Jinko panels, 3.76 kWp (the size of the array), with a 5 kWh Anker battery. At design stage we expected it to make well above what the household uses. So a good part of the year's power was always going to be stored or exported. The 5 kWh unit is the smaller of the two battery sizes we fit most often. It suits a house that does not use much power in the evening.
- System size
- 3.8 kWp
- Panels
- 8 × Jinko Solar JKM470N-60HL4
- Inverter
- Anker SOLIX X1-H6K-S
- Battery
- Anker SOLIX X1-B5-H (5.0 kWh)
- Est. annual savings
- £773
- Estimated at design stage from this system’s modelled annual generation and this household’s own electricity use and tariff at the time — not a measured result. Your own figures will differ.
Explore more
- Installed in Bexhill — one of 2 Bexhill case studies published here.
- Solar panel installation — how we design and fit systems like this one.
More installations in Bexhill
Want a system like this?
Get a free, no-obligation estimate for solar and battery storage tailored to your home.
Try the Solar Calculator