10-Panel Solar Installation in Polegate
10 panels · 4.6 kWp · 10.0 kWh battery
About this installation
In Polegate, we installed a 4.6 kWp solar and battery system for a homeowner. The setup includes ten JA Solar JAM54D41-460/LR panels, an Anker SOLIX X1-H6K-S inverter, and a 10 kWh Anker SOLIX X1-B5-H battery.
This system is modelled to generate around 5,374 kWh a year, about 154% of the home's annual electricity use. It saves the homeowner an estimated £1,068 each year. The installation was completed in June 2026.
Generation and consumption figures are design-stage estimates: the system’s modelled annual output compared with this household’s annual electricity use at the time of the quote. They are an annual energy comparison, not the share of the home’s demand met directly, and not measured results.
Installer’s notes
What the customer asked for, why the system was designed this way, and what the job involved.
10 JA Solar panels, 4.6 kWp (the size of the array), with a 10 kWh Anker battery. The battery is large for an array this size. That usually means the household wanted to move as much power as possible into the evening rather than export it. The design showed it making about half as much again as the home uses.
- System size
- 4.6 kWp
- Panels
- 10 × JA Solar JAM54D41-460/LR
- Inverter
- Anker SOLIX X1-H6K-S
- Battery
- Anker SOLIX X1-B5-H (10.0 kWh)
- Est. annual savings
- £1,068
- Estimated at design stage from this system’s modelled annual generation and this household’s own electricity use and tariff at the time — not a measured result. Your own figures will differ.
Explore more
- Installed in Polegate — one of 4 Polegate case studies published here.
- Solar panel installation — how we design and fit systems like this one.
More installations in Polegate
Want a system like this?
Get a free, no-obligation estimate for solar and battery storage tailored to your home.
Try the Solar Calculator