17-Panel Solar Installation in Polegate
17 panels · 8.0 kWp · 10.0 kWh battery
About this installation
We completed a new solar and battery installation in Polegate in July 2026. This home now has a 7.99 kWp system, featuring 17 Jinko Solar JKM470N-60HL4 panels. Power is managed by an Anker SOLIX X1-H6K-S inverter, and a 10 kWh Anker SOLIX X1-B5-H battery stores energy for later use.
The system typically generates 7,030 kWh each year. That is around 281% of the home's annual electricity use. This results in estimated annual savings of £1,154.
Generation and consumption figures are design-stage estimates: the system’s modelled annual output compared with this household’s annual electricity use at the time of the quote. They are an annual energy comparison, not the share of the home’s demand met directly, and not measured results.
Installer’s notes
What the customer asked for, why the system was designed this way, and what the job involved.
17 panels, 7.99 kWp (the size of the array), with a 10 kWh Anker battery. The design makes close to three times what the household uses. So a good share of the year's power leaves the house on an export tariff. It is the same array size and the same battery as one of our published Hailsham jobs.
- System size
- 8.0 kWp
- Panels
- 17 × Jinko Solar JKM470N-60HL4
- Inverter
- Anker SOLIX X1-H6K-S
- Battery
- Anker SOLIX X1-B5-H (10.0 kWh)
- Est. annual savings
- £1,154
- Estimated at design stage from this system’s modelled annual generation and this household’s own electricity use and tariff at the time — not a measured result. Your own figures will differ.
Explore more
- Installed in Polegate — one of 4 Polegate case studies published here.
- Solar panel installation — how we design and fit systems like this one.
More installations in Polegate
Want a system like this?
Get a free, no-obligation estimate for solar and battery storage tailored to your home.
Try the Solar Calculator