14-Panel Solar Installation in Polegate
14 panels · 6.6 kWp · 5.0 kWh battery
About this installation
In July 2026, we completed a solar and battery installation for a homeowner in Polegate. The system consists of 14 Jinko Solar JKM470N-60HL4 panels, delivering 6.58 kWp, alongside an Anker SOLIX X1-H6K-S inverter and a 5 kWh Anker SOLIX X1-B5-H battery.
This Polegate system generates 7,098 kWh of electricity annually. That is around 394% of the home's annual electricity use, with estimated annual savings of £1,068 for the homeowner.
Generation and consumption figures are design-stage estimates: the system’s modelled annual output compared with this household’s annual electricity use at the time of the quote. They are an annual energy comparison, not the share of the home’s demand met directly, and not measured results.
Installer’s notes
What the customer asked for, why the system was designed this way, and what the job involved.
14 panels, 6.58 kWp (the size of the array), with a 5 kWh Anker battery. This is the biggest gap we have published between power made and power used. The design makes close to four times what the household was expected to get through. That is a home that uses little electricity, with a big roof. So most of the power leaves the house, and the smaller battery covers the evening.
- System size
- 6.6 kWp
- Panels
- 14 × Jinko Solar JKM470N-60HL4
- Inverter
- Anker SOLIX X1-H6K-S
- Battery
- Anker SOLIX X1-B5-H (5.0 kWh)
- Est. annual savings
- £1,068
- Estimated at design stage from this system’s modelled annual generation and this household’s own electricity use and tariff at the time — not a measured result. Your own figures will differ.
Explore more
- Installed in Polegate — one of 4 Polegate case studies published here.
- Solar panel installation — how we design and fit systems like this one.
More installations in Polegate
Want a system like this?
Get a free, no-obligation estimate for solar and battery storage tailored to your home.
Try the Solar Calculator