Solar panels Ninfield homeowners can spec properly, across TN33 village homes, Standard Hill properties, and the barn conversions and detached houses scattered through the surrounding countryside. Roof space is often generous here, but that does not automatically mean every roof face should be filled — tree lines, orientation, and future electrification plans all matter.
Solar installers in Ninfield: design, install, and aftercare for solar panels, batteries, and EV-ready setups — itemised quotes, no call-centre runaround.
1–3 days on site
~4 weeks from enquiry to install
No obligation
We install across Ninfield and roughly 5 miles around it, covering TN33. That's Rother District Council territory — we handle any submissions on your behalf. Just outside the circle? Ask anyway — we're often already working nearby.
Map loads when you scroll here
Ninfield's coverage area, plus our privacy-safe install pins
Postcodes
Neighbourhoods
Nearby towns we also cover
Pins are privacy-offset by around 100–200m, so the map never shows an exact customer address.
Design · Primary reason
We assess shading, roof condition, and access carefully on rural Ninfield installs, especially where older tiles, outbuildings, and mature trees affect output or scaffold planning. That upfront work helps avoid systems that look large on paper but underperform in practice.
Many TN33 households want solar to support a heat pump, EV charger, or battery over time. We size the system around that longer-term usage pattern, so you are not boxed into an inverter or battery choice that feels too small a year later.
Open countryside settings often make panel appearance and planning detail more important. We aim for predictable generation, clean visual lines, and a straightforward install process rather than pushing the maximum panel count at all costs.
Planning & permissions
Most homes fall under permitted development. If your property is listed or in a conservation area, we’ll advise during the survey and handle any Rother District Council submissions if needed.
Rother District Council is the local planning authority for Battle, Bexhill, Robertsbridge and Ninfield.
The council lists solar panels among the works that are normally permitted development, so no planning application is needed. The rules are in Class A, Part 14, Schedule 2 of the General Permitted Development Order. Panels must not stick out more than 0.2 metres from the roof slope, must not sit higher than the highest part of the roof apart from the chimney, and must be placed so their effect on the building and the area is as small as possible. Class A does not apply at all if your home is listed.
Rother says permitted development may not apply if you are in the High Weald National Landscape, a conservation area or a Site of Special Scientific Interest, and that rights may have been removed by an earlier decision. Its general note that permitted development does not apply to flats is about householder rights; for solar, the order covers a block of flats as a whole, with its own limits. Its conservation areas include Battle, Bexhill Old Town, Bexhill Town Centre and Robertsbridge and Northbridge Street. 83% of the district is in the High Weald.
We confirm the position at survey and handle the submission.
The High Weald is a National Landscape, designated as an Area of Outstanding Natural Beauty in 1983. It is not a planning authority. The High Weald team says responsibility for deciding planning applications stays with the fifteen local authorities the area covers, so your application still goes to Wealden or Rother.
Over 53% of Wealden District and 83% of Rother District are inside it. Both councils have adopted the High Weald Management Plan and both say it is a material consideration when they decide a planning application.
A National Landscape counts as article 2(3) land under the General Permitted Development Order. That matters in one specific way for solar: for a flat roof array you must first ask the council whether its prior approval is needed for how the panels will look, before work starts. Roof panels on a pitched roof are treated the same as anywhere else, within the usual Class A limits.
Rother also says permitted development may not apply in parts of the district inside the National Landscape, so it is worth checking.
We confirm the position at survey and handle the submission.
Don't see your exact postcode in the coverage list above? We're often nearby — ask and we'll confirm quickly.
Typical installs land between £6,000 and £12,500, depending on roof layout, system size, and whether you add a battery. We'll give you a fixed, itemised quote before any work starts.
Part of 450+ installations across East Sussex, from our base in Eastbourne.
Swipe on mobile
Common add-ons
Want a price that fits your roof and usage? We'll keep it simple and itemised.
Final price depends on roof layout, access and DNO requirements.
Not sure what solar will cost in Ninfield? Use our free calculator to get a tailored estimate — savings, system size, and battery options for your home, based on your actual roof.
Enter your postcode on the right to start. We'll analyse your roof from satellite imagery and show you what a typical install could save you each year.
Satellite roof analysis
We map your roof and sun exposure for your property.
Personalised savings estimate
See estimated annual savings, costs, and payback period.
System & battery sizing
Panel count and battery options matched to your energy use.
No cold calls · MCS certified local installers · Free site survey if you proceed
A straightforward run-through of what happens from first enquiry to switch-on. Projects are typically completed within four weeks of your first enquiry, with the installation itself normally taking 1–3 days.
Week 1
Free site survey
Week 1–2
Design + itemised quote
Week 2–4
DNO + paperwork handled
Week 3–5
Installation on-site
Week 4–6
Switch-on + monitoring
Step 1 · 45–60 min
We assess roof space, shading, access and your usage, then confirm a system size that fits.
Step 2 · 2–5 days
You get a clear layout, expected generation, and a fixed, itemised quote so there are no surprises.
Step 3 · 1–3 weeks
We handle the DNO application and certification paperwork while we schedule the install.
Step 4 · 1–3 days
Our team installs and commissions the system with minimal disruption and a tidy finish.
Step 5 · Same day
We set up monitoring so you can see production from day one, and help you understand what “good” looks like.
These are published projects completed by Eastbourne Energy. Open a project to see the system information and approved photographs available for that installation.
Every published Ninfield case study below was installed with battery storage.
Models installed on those projects: Anker SOLIX X1-B5-H.
Sizing, tariffs and how storage works alongside solar are covered on our battery storage page.
Verified Google reviews from homeowners we've helped across East Sussex.
Lee was knowledgeable, not too techy and answered all our questions honestly. The team were large - I had 5 vans on the drive the first day putting up 21 panels with their batteries. Smooth, seamless, considerate, jolly, sincere are the words I'd use to describe them. Lee is extremely responsive to messages- we had some notifications about the charge levels and he modified the settings whilst on hols!
Mark YPdisco
Google review
The people putting in the hardware were excellent. The administrative war with Brittish Gas who had captured and lost my MPAN went on for ever. Lee cheerfully battled on. He refused the part payment I offerd until the matter was fully resolved. I would recommend the company to anyone thinking of putting in battery storage and wanting someone proffessional to deal with the paperwork!
Paul Coleshill
Eastbourne (BN24)
Verified Google review
Thank you for everything that you and your team did with the installation new system. Every stage of the process went smoothly. Really appreciated the knowledgeable, informative, low key, no pressure approach that worked for us. We could not be more pleased with the result, most especially the neatness of the wiring and final equipment insulation. It is an investment and the system you installed cost less than I had initially anticipated it would be. We have already seen a saving on the amount of power that we are drawing from the grid, even on cloudy and overcast days. Overall we have found Eastbourne Energy most knowledgeable and professional in every way.
Peter Lambert-Gorwyn
Eastbourne (BN24)
Verified Google review
The same questions we mark up for Google, shown here for homeowners comparing solar installers in Ninfield
Probably not. That is the largest battery we have published. The kWh figure is how much energy a battery can store. Most of our published systems hold between 5 and 10 kWh. A battery is sized on what you use in the evening and overnight. A bigger one is more likely to pay off if you use enough power in the evening to empty it.
More than most people expect. Our Ninfield customer counted five vans on the drive on day one. That job was 21 panels and the batteries. A bigger team means fewer days on site, so you live around scaffolding for less time.
Yes. Our Ninfield customer had notifications about his charge levels after the install. Lee changed the settings for him while he was away on holiday. On that system we can change when it charges and when it gives power back, as his use or his tariff changes.
Yes. The published Ninfield case study on this page is a 21-panel, 9.66 kWp system with battery storage — open it in the projects section above to see the system details and the photographs the customer approved. We cover Ninfield from our base in Eastbourne, across TN33, including Standard Hill, Hooe, Catsfield.
Yes — the one published Ninfield case study on this page was installed with battery storage. The published systems use Anker SOLIX X1-B5-H. Whether a battery is worth it for you depends on how much of your generation you would otherwise export, so we model that before quoting. Our battery storage service page covers sizing and how storage works alongside solar.
Rother District Council is the local planning authority for Ninfield. Most domestic rooftop solar is permitted development, so an application is often not needed at all; listed buildings, conservation areas and some flats need extra checks. We confirm which applies during the survey and handle any Rother District Council submission on your behalf.
A typical 4kW install in Ninfield costs £6,000–£8,000. Final price depends on roof layout, system size, and whether you add a battery. We provide a fixed, itemised quote after a survey so you know exactly what's included.
Most domestic rooftop solar in Ninfield falls under permitted development, so planning permission is often not needed. Listed buildings, conservation areas and some flats can need extra checks. We confirm the position during the survey and handle any Rother District Council submission on your behalf.
We also serve these nearby East Sussex towns with the same MCS-certified solar panel installation services.
MCS installers & free quotes
MCS installers & free quotes
MCS installers & free quotes
MCS installers & free quotes
MCS installers & free quotes
MCS installers & free quotes
14+ towns covered across East Sussex
Part of our wider solar panels East Sussex coverage, with county-level pricing and area guidance.
Helpful guides for Ninfield homeowners
Maximise your solar savings with the right export tariff.
Read articleRoof pitch and orientation, and what they mean for output.
Read articleKeeping a system generating well after switch-on.
Read articleFrom the knowledge base
Reference guides our installers wrote, if you want the detail.
Permitted development depends on the building and its setting, so treat the town notes as a starting point, not a decision. Each council section on this page lists its own sources.
Have questions about solar panels or our services? Get in touch with our team for expert advice.
Loading contact form...
Loading opening hours...
Ready to start your solar journey? Get in touch with our friendly team of experts. We're here to answer your questions and provide you with a personalised solar solution.
Unit 66, Hammonds Drive, Eastbourne, BN23 6PW
